Kia Stinger Exhaust Tips Thread

[ATXStinger]

If you guys are interested in removing the exhaust tips, here's a close-up of a pair that's been powder-coated black.

Both sides are held onto the bumper with four screws which are accessible from behind.

86661-J5300, 86662-J5300

=====================================================================


Some Aftermarket Exhaust Tips

JUN BL Exhaust Tip

Akrapovic Glossy Carbon Fiber Exhaust Tip

 

[brandons85]

Now if Borla would just released their tips we can start swapping .

 

[TuscaniCustoms]

If somebody needs replacement stock tips check out my store https://tuscanicustoms.com/exhausts...-stinger.html#/oem_exhaust_tips-set_leftright

 

[Erock1800]

If you guys are interested in removing the exhaust tips, here's a close-up of a pair that's been powder-coated black.

Both sides are held onto the bumper with four screws which are accessible from behind.

86661-J5300, 86662-J5300

So you don?t have to remove the rear bumper to remove the tips?

 

[ATXStinger]

So you don?t have to remove the rear bumper to remove the tips?

Nope just the four screws from behind the bumper.

 

[Erock1800]

Nope just the four screws from behind the bumper.

Excellent thank you.

 

[brandons85]

Has anyone considered removing the stock tips and doing Titanium Anodizing?
[video=youtube;Tko9Oaq8yUA]https://www.youtube.com/watch?v=Tko9Oaq8yUA[/video]

 

[BIGBIKES]

Do you need to undo mufflers to get them off ??
Thanks

 

[GDI Guy]

Do you need to undo mufflers to get them off ??
Thanks

If you're referring to the exhaust tips then no. You can remove them from behind the bumper

 

[BIGBIKES]

If you're referring to the exhaust tips then no. You can remove them from behind the bumper

I thought you needed to-undo muffler to replace tips as youtube vid guy lets muffler hang down..cheers

 

[Robs]

Has anyone considered removing the stock tips and doing Titanium Anodizing?
[video=youtube;Tko9Oaq8yUA]

Not sure if it’s the same as Titanium anodizing but had mine Cerakoted

 

[Conv_GSDriver]

The Akrapovic tips actually fit this car?

 

[Koreandude]

The Akrapovic tips actually fit this car?

They look like a universal fit and not configured for direct replacement of the OE tips. An exhaust shop comfortable doing custom work could "possibly" fabricate it to replace the OE tips but it sounds tedious and likely expensive...

 

[dks209]

Is there any debate between powder coating vs cerakoting the tips?

 

[spider55]

This is a cold start with RPM down pipes & Magnaflow Catback Exhaust....