- Messages
- 36
- Likes
- 12
- State
- CA
- Country
- United States
- What I Drive
- 2018 stinger GT2 AWD
I dont frequesnt the forums as they mostly dead before but thought i should come by and share knowledge ans answer questions
For refenrence.....
I was the first in the US with the Jun BL EVC tyoe exhaust
I was one of the first with the Jun BL downpipes
I was one of the first to use the Lap3 Chip and one of the first to plow a plug and coil pack because of it
I was the test vehicle used by magnaflow to create the 3.3 magnaflow exhaust (thats my car in their promo vid)
I was the test vehicle for Injens upcoming intake for the 3.3
I was the first to have the JB4 unit from burger motorsports. I drove out to their location to test it out and make sure it worked. (its my car in their install intruction pictures)
I am currently testing out Keendesign Chip
I have Keendesign KD07 20" forged wheels
I have a meth kit installed
List of mods currently on the car are:
KeenDesign KD07 wheels
Snow Performance meth kit
Jun BL down pipes
Jun BL EVC type exhaust
M&S spoiler
The aftermarket place Carbon fiber hood vents and fender vents
Carbon fiber Mirror caps and fuel door
Eibach Lowering springs
If anyone has quesions, ask away. the most common one i get is usually about the exhaust systems
Currently have almost 17,000 miles on my stinger partly because i drove it cross country
My instagram is @kia_stinger_gt
And there is a youtube channel "StingerGT Channel"
Lastly Im not some random guy who drives a lot and get parts for his stinger. I have a close relationship with LAP3/PROSS and have for several years. With their products i built my Optima in my garage to 430WHP and held the record for a while until my friend beat it with his optima we built in my garage as well. HAve been driving and modding kia vehicles since 2002.
For refenrence.....
I was the first in the US with the Jun BL EVC tyoe exhaust
I was one of the first with the Jun BL downpipes
I was one of the first to use the Lap3 Chip and one of the first to plow a plug and coil pack because of it
I was the test vehicle used by magnaflow to create the 3.3 magnaflow exhaust (thats my car in their promo vid)
I was the test vehicle for Injens upcoming intake for the 3.3
I was the first to have the JB4 unit from burger motorsports. I drove out to their location to test it out and make sure it worked. (its my car in their install intruction pictures)
I am currently testing out Keendesign Chip
I have Keendesign KD07 20" forged wheels
I have a meth kit installed
List of mods currently on the car are:
KeenDesign KD07 wheels
Snow Performance meth kit
Jun BL down pipes
Jun BL EVC type exhaust
M&S spoiler
The aftermarket place Carbon fiber hood vents and fender vents
Carbon fiber Mirror caps and fuel door
Eibach Lowering springs
If anyone has quesions, ask away. the most common one i get is usually about the exhaust systems
Currently have almost 17,000 miles on my stinger partly because i drove it cross country
My instagram is @kia_stinger_gt
And there is a youtube channel "StingerGT Channel"
Lastly Im not some random guy who drives a lot and get parts for his stinger. I have a close relationship with LAP3/PROSS and have for several years. With their products i built my Optima in my garage to 430WHP and held the record for a while until my friend beat it with his optima we built in my garage as well. HAve been driving and modding kia vehicles since 2002.