Share your Kia Stinger phone mounts

[Klruff1]

What radar detector are you running, I spy an escort mount.

Just a cheap whistler radar detector.

 

[CARmello Yellow]

am i the only one who uses the apple car play and puts the phone in the slide open compartment???

 

[spider55]

am i the only one who uses the apple car play and puts the phone in the slide open compartment???

No your not, I use android auto and I put my phone on the charger next to the USB.

 

[spider55]

Not double sided tape, just a peel and stick pop socket brand. Crazy sticky! Think it may work in Phoenix, shouldn't fall off as it is protected by the center display from getting direct sunlight and your air conditioner will keep it cool! May be worth a try, think it was $10 at Walmart.

Sorry but that will still not work in Phoenix, when it's 118 degrees outside and you park your car anywhere, in less then a half hour your car is between 150 to 160 degrees inside, NOTHING that has tape or a sticky backing will survive inside your car. If you have your phone mount their an you don't have AC directly on your phone the sun will still get your phone to hot. You cant leave anything in your car especially electronics and drinks like water bottles because the bottles have been none to explode from getting too hot.

 

[jatleson]

Not a Stinger, but this is how I mount all phones. Use the seat post as a base, fabricate a base out of aluminum and go up. Ram Mount fitting. Not the cheapest, but they are fully customizable, don't require modification to the car and will never fail.

 

[johnnywalker]

Not a Stinger, but this is how I mount all phones. Use the seat post as a base, fabricate a base out of aluminum and go up. Ram Mount fitting. Not the cheapest, but they are fully customizable, don't require modification to the car and will never fail.

View attachment 2084 View attachment 2085

Nice job

 

[jasonvt]

am i the only one who uses the apple car play and puts the phone in the slide open compartment???

I do the same.


Sent from my iPhone using Tapatalk

 

[yellowjacket]

Combined "brodit" and "belkin". Very well suited for this double-sided adhesive tape
View attachment 1426
View attachment 1427
View attachment 1428

Could you elaborate on what is well suited for the tape? Can you link to the parts from Brodit? Has this worked well?

 

[slanick]

https://www.brodit.com
Plain double-sided adhesive tape. But be sure to remove the rubber seal from Belkin, otherwise it will not hold

 

[yellowjacket]

https://www.brodit.com
Plain double-sided adhesive tape. But be sure to remove the rubber seal from Belkin, otherwise it will not hold

I ended up using Loctite flexible adhesive plastic glue. TBD whether it will be strong enough. How's the double sided adhesive holding up?



I may lower it like yours once the Belkin arrives, but I've been growing fond of what was supposed to be a temporary location since my phone can scan my face from that distance and unlock if necessary.

 

[no1djpj]

I found a clean and simple way

 

[Shrikecorp]

I found a clean and simple way

That looks similar to the ones Burger is selling...I put mine here. Don't really want to see while driving, but accessible if needed.

 

[slanick]

Brodit all the same released the brand stand
https://www.brodit.com/product.html?id=855548&pn=prod&brand=Kia&model=Stinger&year=2018

 

[spider55]

I picked up a macally 2-in--1 tablet and smartphone holder, works very well..

 

[snowmirage]

View attachment 2856

Brodit all the same released the brand stand
https://www.brodit.com/product.html?id=855548&pn=prod&brand=Kia&model=Stinger&year=2018

Hu is that actually from Proclip? Never heard of Brodit before.

Looking at that though it looks like it screws into the dash? Or am I missing something?

 

[snowmirage]

Well it appears it is from proclip!

https://www.proclipusa.com/product/855548-center-dash-mount

Thought I head read some place they weren't coming out with one!

 

[slanick]

Hu is that actually from Proclip? Never heard of Brodit before.

Looking at that though it looks like it screws into the dash? Or am I missing something?

No drilling holes or dismantling of the dashboard is required.

 

[Chris71]

This one is a keeper, my 3rd try
Buy this

$16.00

Cut or use plyers to get rid of adapter, under it is a thread and nut which is perfect!
Drill 7/16th hole
Wedge thread through, tighten nut. I did put a dab of glue on bottom of mine.

Sent from my iPhone using Tapatalk Pro

 

[mzones]

My mom bought me the Weathertech cup holder one. It works pretty well other than taking up a cup spot.
I only need it when charging. Otherwise i just but the phone in the cup holder itself.

 

[Danny5]

Thanks to all your ideas, I bought an all metal ball mount from Amazon. Its the peel and stick kind, supporting over 6.5lbs and is a SUPER strong magnetic mount.


Comes with a couple of metal plates to install on your phone. I chose the smallest one and stuck it at the bottom of my case. Because it's so small, the wireless charger in my car still works perfect!


Now, will it hold up in the AZ heat? I'll let you know if it fails this summer...